swimming pools
swimming pool lighting features
The lighting features of any pool essentially fit into three basic requirements:
And if it is quite easy to choose IP-protected devices, then the fulfillment of the other two requirements is almost always a certain compromise - after all, placing the lamps on the example of a pool bowl, we risk getting a high uneven light distribution (the level of illumination at the water's edge will be significantly higher than in the center of the pool) .
There are two ways to solve this problem - a competent selection of the optics of lighting devices and their well-thought-out arrangement, or the use of reflected light systems, when we use projector-type lamps, directing them upwards, that is, we illuminate the pool bowl with light reflected from the ceiling or special reflective elements. However, it is worth noting that the use of reflected light systems is possible only for rooms with high ceilings.
Preschool pools, as a rule, are characterized by small dimensions and a ceiling height of up to 3.5 meters, so it is usually possible to get by with the use of standard IP-protected lighting devices located around the perimeter of the pool bowl. At the same time, we must monitor two parameters - ensuring the normalized 300 lux at the central point of the pool and the level of illumination unevenness (so that there is no strong overexposure along the perimeter of the pool).
- compliance with the norms (illumination level 300 lux above the water plane);
- use of luminaires suitable for IP protection;
- lack of lighting devices directly above the water surface.
And if it is quite easy to choose IP-protected devices, then the fulfillment of the other two requirements is almost always a certain compromise - after all, placing the lamps on the example of a pool bowl, we risk getting a high uneven light distribution (the level of illumination at the water's edge will be significantly higher than in the center of the pool) .
There are two ways to solve this problem - a competent selection of the optics of lighting devices and their well-thought-out arrangement, or the use of reflected light systems, when we use projector-type lamps, directing them upwards, that is, we illuminate the pool bowl with light reflected from the ceiling or special reflective elements. However, it is worth noting that the use of reflected light systems is possible only for rooms with high ceilings.
Preschool pools, as a rule, are characterized by small dimensions and a ceiling height of up to 3.5 meters, so it is usually possible to get by with the use of standard IP-protected lighting devices located around the perimeter of the pool bowl. At the same time, we must monitor two parameters - ensuring the normalized 300 lux at the central point of the pool and the level of illumination unevenness (so that there is no strong overexposure along the perimeter of the pool).
we will help you solve your problem